![Troubleshooting Relais Steuerung Last](https://www.nanotec.com/fileadmin/_processed_/c/0/csm_Troubleshooting_Relais_Steuerung_Last_0a9a135081.webp)
The motor controllers and motors with integrated controllers have open collector outputs. To switch a load or PLC, you require a relay according to this circuit diagram. The flyback diode is required. Please don't exceed the maximum switching current or the maximum voltage of the selected controller/drive. You can find this information in the product manual.
SMCI35: A load/PLC cannot be connected with this controller.