LED signaling
Power LED
The power LED indicates the current status.
Normal operation
In normal operation, the green power LED L1 flashes briefly once per second.
Case of an error
If an error has occurred, the LED turns red and signals an error number.In the following figure, the error number 3 is signaled.
The following table shows the meaning of the error numbers.
Flash rate | Error |
---|---|
1 | General |
2 | Voltage |
3 | Temperature |
4 | Overcurrent |
5 | Controller |
6 | Watchdog-Reset |
Note: For each error that occurs, a more precise error code is stored in object 1003h.
Tip: You can switch off the power LEDs with 3250h:09h.