clear configuration
active configuration
back to configurator

SCB6018 –  Stepper motor with FluxFocus technology – NEMA 24

High-torque stepper motor. Size NEMA 24

Ultra high-torque stepper motor with integrated connector and 60 mm flange. By inserting rare earth magnets between the stator teeth, stray magnetic flux is redirected into the teeth, resulting in a holding torque of up to 3.6 Nm.

The SCB6018 motor comes with a second shaft for mounting an optical or magnetic encoder.

  • Highest torque/size ratio of all NEMA 24 stepper motors on the market due to FluxFocus technology
  • Torque improvement over the whole speed range
  • 1.8° step angle
  • Improved efficiency

When you have selected a motor, you will find a matching encoder quickly and easily with the help of our product configurator.

Matching motor controllers: 
C5-E, CL4-E

Benefits

High-torque with stepper motor. NEMA 24

Motor with FluxFocus technology

Additional permanent magnets between the stator teeth help to concentrate the magnetic flux in the stator teeth. This way flux leakage is reduced and the overall torque performance improves.
See torque comparison of stepper motors

Torque curve comparison

Motors with FluxFocus technology reach a higher torque over the whole speed range than standard stepper motors of the same size.
Stepper motors with high torque

Standard motor

In standard stepper motors only a certain amount of the magnetic flux is used to generate torque. The non-torque producing flux or flux leakage flows past the stator teeth.

SCB6018 Articles

Please wait while productfinder is loading ...

{{ curve.panelTitle }}

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.
Recommended load limit
Continuous duty region
Torque [Nm] at {{ curve.comparePoint | number : 2 }} rpm Speed [rpm] at {{ curve.comparePoint | number : 2 }} Nm
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}
  • {{ attribute.label }}

{{ curve.panelTitle }}

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.
Recommended load limit
Continuous duty region
Torque [Nm] at {{ curve.comparePoint | number : 2 }} rpm Speed [rpm] at {{ curve.comparePoint | number : 2 }} Nm
{{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}
  • {{ attribute.label }}

{{ curve.panelTitle }}

Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.
Recommended load limit
Continuous duty region
Force [N] at {{ curve.comparePoint | number : 2 }} mm/s Speed [mm/s] at {{ curve.comparePoint | number : 2 }} N
{{ dataRow.max_power }}A {{ dataRow.voltage }}V {{ dataRow.wiring }}
 
 
 
 {{ curve.calculateValueAtComparePoint(dataRow) }}
  • {{ attribute.label }}
Instructions/Help Share results
{{ pfinder.totalResults }} Results Filter

{{ pfinder.totalResults }} Results

Show