PD1-C281S15-E-20-5 –  Stepper motor with integrated controller – NEMA 11

Volume Discount

For quantities greater than 10, please contact us for volume pricing.

Availability

Combine article
Please click on „Combine Article” or the plus sign to start the configurator.

Technical Data

  • IP-Protection Motor (Except Shaft Output) IP20 
  • NEMA 11 
  • Interface
  • Operating Voltage 12 VDC - 30 VDC
  • Peak Current (RMS) 3 A
  • Type of Digital Inputs 5/24 V switchable 
  • Type of Analog Input 0 - 30 V 
  • Type of Digital Output push-pull (5/24 V switchable, max. 50mA)  
  • Encoder Type single-turn absolute 
  • Length 2.1 in
  • Size 1.1 in
  • Fieldbus Modbus RTU 
  • Holding Torque 12.7 oz-in
  • Rated Current (RMS) 1.5 A
  • Number of Digital Inputs
  • Number of Analog Inputs
  • Number of Digital Outputs
  • Encoder  
  • Encoder Resolution 4096 CPR

Dimensions


Torque Curves

Created with Highcharts 9.3.3Speed [rpm]Torque [Nm]1.002.004.001020401002004001 0002 0004 00000.0400.0800.120.16
Recommended load limit:
Maximum short-term static load that may be reached when the service life is taken into account.
Torque
Output power
Torque [Nm] at 448.00 rpm
1.5A 12V
 
 
0.103
1.5A 24V
 
 
0.105
1.5A 30V
 
 
0.108
3A 12V
 
 
0.117
3A 24V
 
 
0.149
3A 30V
 
 
0.15

Accessories

ZK-MPS-12-0.5M-S IO/COM/PWR PD1-Cxx-20-x 0.5m

Knowledge Base

This application note shows how to establish communication between Nanotec drives via CANopen. NanoJ programming allows you to realize simple master/slave functionalities, such as synchronizing two drives without a PLC.
More details
The examples and the Application Note show you how the NanoJ Library simplifies the use of the CiA 402 Power State Machine. The functions of the library are contained in a single header file, which you can easily add to your NanoJ project in Plug & Drive Studio.
More details