Safety and warning notices
CAUTION:
- Risk of overheating or fire if there is insufficient cooling!
- If cooling is insufficient or if the ambient temperature is too high, there is a risk of overheating or fire.
- ► During use, make certain that the cooling and environmental conditions are ensured.
- ► With respect to the installation position of motor PD6-EB..., ensure that the cooling fins provide maximum heat dissipation.
Note:
- Damage to the controller due to excitation voltage of the motor!
- Voltage peaks during operation may damage the controller.
- ► Install suitable circuits (e. g., charging capacitor) that reduce voltage peaks.
Note:
- Damage to the electronics through improper handling of ESD-sensitive components!
- The device contains components that are sensitive to electrostatic discharge. Improper handling can damage the device.
- ► Observe the basic principles of ESD protection when handling the device.
Note:
- Damage to the electronics if the supply voltage is connected with reversed polarity!
- Polarity reversal results in a short-circuit between supply voltage and GND (earth) via the power diode.
- ► Observe the Pin assignment.
- ► Install a line protection device (fuse) in the supply line.