Safety and warning notices CAUTION: Risk of overheating or fire if there is insufficient cooling! If cooling is insufficient or if the ambient temperature is too high, there is a risk of overheating or fire. ► During use, make certain that the cooling and environmental conditions are ensured. ► With respect to the installation position of motor PD6-EB..., ensure that the cooling fins provide maximum heat dissipation. Note: Damage to the controller due to excitation voltage of the motor! Voltage peaks during operation may damage the controller. ► Install suitable circuits (e. g., charging capacitor) that reduce voltage peaks. Note: Damage to the electronics through improper handling of ESD-sensitive components! The device contains components that are sensitive to electrostatic discharge. Improper handling can damage the device. ► Observe the basic principles of ESD protection when handling the device. Note: Damage to the electronics if the supply voltage is connected with reversed polarity! Polarity reversal results in a short-circuit between supply voltage and GND (earth) via the power diode. ► Observe the Pin assignment. ► Install a line protection device (fuse) in the supply line.
Safety and warning notices CAUTION: Risk of overheating or fire if there is insufficient cooling! If cooling is insufficient or if the ambient temperature is too high, there is a risk of overheating or fire. ► During use, make certain that the cooling and environmental conditions are ensured. ► With respect to the installation position of motor PD6-EB..., ensure that the cooling fins provide maximum heat dissipation. Note: Damage to the controller due to excitation voltage of the motor! Voltage peaks during operation may damage the controller. ► Install suitable circuits (e. g., charging capacitor) that reduce voltage peaks. Note: Damage to the electronics through improper handling of ESD-sensitive components! The device contains components that are sensitive to electrostatic discharge. Improper handling can damage the device. ► Observe the basic principles of ESD protection when handling the device. Note: Damage to the electronics if the supply voltage is connected with reversed polarity! Polarity reversal results in a short-circuit between supply voltage and GND (earth) via the power diode. ► Observe the Pin assignment. ► Install a line protection device (fuse) in the supply line.
